Will 19x10s fit on a mazda 3 mps rear?
---
I am here: http://tapatalk.com/map.php?wvf5db
Printable View
Will 19x10s fit on a mazda 3 mps rear?
---
I am here: http://tapatalk.com/map.php?wvf5db
WOW 19x10's thats ambitious to say the least.
I have never heard of something the wide on a 3 before, most I have heard of is 8.5 and they have had to roll guards and still get scrubbing depending on overall height.
Im going to say straight out no, but somebody correct me if I am wrong.
nothings impossible. If you want to tuck them then there needs to be shaving (more like removal) inner guards, rolling guards and pumping them. Big money with pumping guards properly, or just do the baseball bat trick which is ghetto as ****. Poking them would be an easier(ish) option, but still needing pretty much the same list as tucking and the car will sit higher.
And this also depends on how much room is actually available in the guard, tubbing them may be a final option and seriously not worth it.
For bragging right of having them on the car its not worth the trouble or money.
I had 20x8.5 on my old SP23 dropped on coil overs (tucking rim) and didnt have any drama with scrubbing. Whiteminx, memeber on here had 9's on hers
Oh and its not the rears you have to worry about so much, its the front.
Lol on the fronts i wana put 19x8s so that should be fine?
Hmmm the 19x10s on the rears lol maybe to ambitious?
---
I am here: http://tapatalk.com/map.php?etb1u0
that should be fine, possible scrubbing on inner guard. 10's in the rear, might end up being a lot of work and $$$$
+1Quote:
Originally Posted by Devil MPS
I believe there is a guy in the states attempting this aswell. From what others have said looks like possible panel work to fit then nicely.
Sent from my GT-I9100 using Tapatalk
GOOD LUCK! I'd say no and dont.. u'd have to tub the rear by this i mean the guard would have to be pushed out. the tyre/rim is too wide for the weight and will skip around corners, the only way you would stop the skip is go a tyre with taller walls so theres give. BUT than you cant get them under there so more work would have to be done to the guards. 9' wide max dropping back to a 235 tyres, if your going for looks go a 19x8.5 with lower offset at least the weight of rim will be less :P
all depends on offset also...
Im running 18x9.5 +35 atm with rolled guards only and theres slight scrap on the rear bumper plastic thing
but yeah im sure 18x10 is achieveable with some neg camber and rolled or pulled guards.
Regards,
lol, don't.
Haha ok maybe not tens but what will be the biggest size without much hassle?
---
I am here: http://tapatalk.com/map.php?g2sti0
anything wider than stock you'll more than likely need to roll the guard, pending on how low and offset.
Running stock suspension?
Rolled lip can see you 8.5 +40 maybe +35..Quote:
Originally Posted by black mamba
did you miss my post? Im running 18x9.5 +35 lowered on H&R and rolled guards not that hard to roll guards also
+1 look at his post dudeQuote:
Originally Posted by Bankai
Nice 9.5s..
Can you show me any pics of how they look?
---
I am here: http://tapatalk.com/map.php?dtl5yh
Dude ur ride looks sick man
---
I am here: http://tapatalk.com/map.php?hztr10
Yep it's one of the nicer 3 MPS I have seen. What sort of wheels are you planning on buying?
thanks guys its up for sale *wink wink shove shove nudge nudge* haha
is it sold yet?