Noob question :p
Is it possible to remove the exhaust tips from a Gen 2 (2010) ? It looks like it may almost slide off the tail pipes ? I've tried to pull them off without luck.
Printable View
Noob question :p
Is it possible to remove the exhaust tips from a Gen 2 (2010) ? It looks like it may almost slide off the tail pipes ? I've tried to pull them off without luck.
off topic ~ I have been looking for nice tips for months but no luck at all :'(
@slixx did some recently.
Sent from my Huge Samsung Note 2
eBay Australia: Buy new & used fashion, electronics & home d I got these. :)
Note! Gen1's need 2.5' pipe
The guy who changed them out just cut them off. The tip cover seems to be welded on the original exhaustQuote:
Originally Posted by Yeldarb
Peter "SLIXX"
Bugger... I was hoping to just slide them off somehow. I found some nice tips to replace mine with.Quote:
Originally Posted by slixx
mine is this one MPS 3 Dual Cat Back Exhaust - Mazda 3 MPS Generation 2 | MPS GarageQuote:
Originally Posted by RedDjinn
so I should get a 2.5" inlet or 3"??
Looks 2.5' pipesQuote:
Originally Posted by 37371118
Can you measure them?
You can drill or grind the spotwelds off.Quote:
Originally Posted by naasif
yeah they'll be a tak weld (or two) somewhere at the back. you may need to remove the rear muffler section to access them. 15 seconds with an angle grinder, and they'll slide off. i have no experience with MPS exhaust tips, but most modern cars with tips are like this.