Printable View
I just bought a Corksport rear strut brace today, but encountered a slight problem with the M10 x 45mm bolts that Corksport supplied in the package, i found these bolts to be a bit short, i think it will need at least M10 x 60mm bolts, just be aware of this if you decide to purchase them.
Guessing that's for a 6? Do you need to remove any trim in the boot to fit it?
probably best to check with @TylerAtCorkSport
Hi mate, it is a 6 MPS. Just remove one trim in the boot so you can access the rear seat fold-down latches on the top. It is very small latch, so need to inspect carefully to find it. Once the rear seats are folded down, you should be able to do all the work without any problem. Also, you may need to buy Champion brand M10 x 1.25 x 50mm bolts from Supercheap Auto. If you encounter any problem, just ask me and i will try to help.Quote:
Originally Posted by Reedy
- - - Updated - - -
thanks mate, it's all sorted now, bought the right bolts from Supercheap Auto.Quote:
Originally Posted by lup15