i am keen on EGR block job. here is 15s EGR block job but i don't have AP to disable cel on dash
How To - EGR Block off FREE 15 second job
i think we could make a thin EGR block gasket to block it
what you need:
any can of soft drink/beer
how to:
1. remove stock Airbox/SRI/CAI, BOV, battery and battery box, turbo inlet then you could see EGR return pipe
https://www.youtube.com/watch?v=SnknYL2ATag
2. remove the 2*8mm bolts on EGR return pipe then take out the stock gasket
3. get a empty can of soft drink/beer
4. cut the can to a small piece by scissors
5. stick paint tap on the piece of can
6. put the gasket on and draw out the edge of gasket
7. cut and trim it
8. drill 2 small holes (for M5 bolt) by any tool, driller, screwdriver, anything you can find
9. remove the paint tape and trim a bit for the 2 holes
10. put the new block gasket between stock gasket and EGR return pipe then bolt on
done & enjoy
for this mod, there should be not cel on dash and no need to config ECU via AP.