Post Your Rims Here!

[bodyboardingbum]

you mean defect notice are here to stay..

Hahaha that too - but they're here regardless :P ... especially for us WA Folk!

[RedDjinn]

Try here in NSW, think we are the worse state anyone care to disagree?

- - - Updated - - -

Think that might need another thread

[chef]

Haha, fair call - this is probably a safe choice!
I believe Shavi's beast is sitting on 9.5 + 15... crazy!

Is that photoshopped or that's how it sits with those rims?

[duglet]

Ok I'll post my new painted rims soon.

From prep to final on car

[bodyboardingbum]

Is that photoshopped or that's how it sits with those rims?

This is how it actually sits, it's bagged though - so can be raised at the press of a button.
Video related, although this is when it was on Coilovers and dropped static i believe.

[slixx]

It just looks like the wheels are gonna fall off


Peter "SLIXX"

[duglet]

Not a fan. Looks ridiculous and unpractical

[chef]

Hey Guys,i have ordered some 18 by 8 + 40 running on 225/40/18 is this enough offset for a Gen1 i don't want no scrubbing .
Thanks Guys in advance ,getting a bit worried might cancel my order.

[RedDjinn]

Hey Guys,i have ordered some 18 by 8 + 40 running on 225/40/18 is this enough offset for a Gen1 i don't want no scrubbing .
Thanks Guys in advance ,getting a bit worried might cancel my order.

Gen1 will see u just touch when lowered.

[bodyboardingbum]

Hey Guys,i have ordered some 18 by 8 + 40 running on 225/40/18 is this enough offset for a Gen1 i don't want no scrubbing .
Thanks Guys in advance ,getting a bit worried might cancel my order.

No need to cancel, just get the guards rolled and you should be fine

[isConnaugh]

Hey Guys,i have ordered some 18 by 8 + 40 running on 225/40/18 is this enough offset for a Gen1 i don't want no scrubbing .
Thanks Guys in advance ,getting a bit worried might cancel my order.

I'm running 8 +38, only needed a slight roll, but that's being maxxed out on my coilovers, if you're not going really low they'll
fit fine man

[Grumpy]

Hey Guys,i have ordered some 18 by 8 + 40 running on 225/40/18 is this enough offset for a Gen1 i don't want no scrubbing .
Thanks Guys in advance ,getting a bit worried might cancel my order.

Hope they sit ok on the Gen1. I had a set, with the same specs, test fitted to my Gen2 before ordering, the rear will just fit in if it were to be lowered, possibly will need the inside lip rolled, the fronts actually sits slightly outside the guard so that would be a problem if lowered too much. With my suspension being stock, I doubt that I would have any issues. I will post up as soon as they arrive.

[chef]

Hope they sit ok on the Gen1. I had a set, with the same specs, test fitted to my Gen2 before ordering, the rear will just fit in if it were to be lowered, possibly will need the inside lip rolled, the fronts actually sits slightly outside the guard so that would be a problem if lowered too much. With my suspension being stock, I doubt that I would have any issues. I will post up as soon as they arrive.

Hi Mate thanks for that, if they poke out on Gen2 then they will be pokin out on Gen1 might look for something with more offset. Like a +42

[leisk]

@chef im running 18x8.5 +30 offset and i rolled my guards and its fine so yours should be more than fine
Forgot to add the 225/45 tyres

[chef]

I'm running 8 +38, only needed a slight roll, but that's being maxxed out on my coilovers, if you're not going really low they'll
fit fine man

Did u get your guards rolled in canberra, thanks

[isConnaugh]

Did u get your guards rolled in canberra, thanks

Yeah got a mate with a guard roller to do it. Real easy job actually, just heat gun and the roller and patience. Nice and flat and had no problems with paint flaking or ripply guards

[dazza]

Yeah got a mate with a guard roller to do it. Real easy job actually, just heat gun and the roller and patience. Nice and flat and had no problems with paint flaking or ripply guards

Getting mine done tomorrow. Rear right scrubbing with 18x8+48 on h&r springs

Sent from my Nexus 4 using Tapatalk 2

[Grumpy]

As mentioned a few posts back, I have finally recieved the PDW C-Spec's, again they are a 18x8x+40 and they seem to sit pretty good on the Gen II. Hopefully I have updated all the threads now

[IMG][/IMG]


They do not stick out as far as I thought they would......

[IMG][/IMG]

[Yeldarb]

Seems to be a bit of stretch... What tyres Andre?

Sent from Samsung Note 2 LTE

[Grumpy]

Tyres are 225/45. Will probably go to 235/40's after this set.