User Tag List

Results 1 to 2 of 2

Thread: Gen1 (BK) Rear Diffuser

  1. #1

    Default Gen1 (BK) Rear Diffuser

    Item: Mazda 3 MPS Gen1 Rear diffuser
    Location: Brisbane
    Item Condition: Brand new
    Reason for selling: Making available to others an item which is not currently on the market
    Price and price conditions: $210 shipped Australia wide to your door. Would require final assembly and coat of paint, though can ship assembled and painted for extra cost.
    Extra Info: Fits Gen1 only, recommend just painting with plastidip.
    Requires rivet gun (rivets supplied) to assemble. Alternatively bolts can be used.
    Made to order
    Requires removal of factory vibration block to install

    u7e3apyn.jpg

    I haven't noticed a scrap of difference with this removed.



    Hey guys, few people have seemed to like the rear diffuser I made so I decided I'd be able to make a few more.
    It consists of a flat base extending from the rear subframe to the lip at the bottom of the rear bumper, onto which 6 parallel fins are mounted by rivets.
    It's made from an aluminium plastic composite material, plastic core with aluminium skin on either side, so quite rigid and tough, as well as keeps weight down (though not like fibreglass or cf etc).
    I do not claim it to have any performance benefit, but if you happen to get some then that's awesome, I made this purely for aesthetic purposes at this point in time.


    Here are some pictures of the diffuser painted and installed on my car:

    vamebyna.jpg

    avuteqeb.jpg

    4ese4upu.jpg

    uputyvy3.jpg

    Fits snug under the back bumper, requiring no drilling into the bumper to secure it;

    5u4y4evy.jpg

    And continues to allow use of the factory tow point;

    dy3yre6u.jpg

    As well as the factory camber adjustment bolts;

    urumuzug.jpg

    It attaches like this, under the plate, or if you want the plate to sit perfectly flat, you could put it on the other side.

    http://img.tapatalk.com/d/14/06/24/t...l/5ava3u2e.jpg

    This is the design of the back of the fin, rounded over:

    2ara8a4e.jpg

    (if you want a different design fin, longer, shorter, etc let me know and I can make it as you want)

    Fins will be shipped like this with brackets attached and all assembly holes pre drilled, the fins and base will be clearly marked for ease of assembly;

    rugu4eze.jpg

    And this is how the diffuser appears once assembled;

    http://img.tapatalk.com/d/14/06/23/t...l/gumy4aru.jpg

    I have a short video showing installation procedure I will send to the buyer to help with install, install should take no more than 5-10minutes. (including jacking car up and back down).



    Alternatively you can purchase the base to give a clean finished smooth look to the underneath rear of your car.

    http://img.tapatalk.com/d/14/06/23/t...l/puha3y8a.jpg


    Cheers,
    Alex.
    Last edited by GibbA; 25-06-2014 at 10:27 AM.
    --> 2008 Metro Grey Sports Pack Gen1 <--

    CS SRI ll CS TIP ll CS AB ll 2XS SSP ll 2XS FMIC ll SURE Anchors ll Enkei RPF1's 17x9 +45 ll Lamin-X Fog Tint ll DBA T3 4000 series ll Remsa pads ll Braided lines
    CP-E S2 RMM ll Hankook RS3 235/40/17 ll Forge V1 BPV ll Whiteline RSB ll AutoTech HPFP
    ll Spin-on Conversion ll Rear Diffuser
    DGR Coilovers ll LED Replacement lights ll "08-MPS" plates ll Cobb AP V3 (E85) ll CP-e TBE ll OCC






  2. #2

    Default

    Bump :-)

    Started a Facebook Page you can also buy this through, check it out and give us a like (if you like it..)

    https://m.facebook.com/GibbsRacingDevelopment



    Sent from my Nexus 5 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •