Is it too late to order a set of 4 x ITV22 since they are on back order in the US ?
I have sent a PM to Edge Auto Sport.
Is there any updates?
They are on their way as of today! Thanks so much for waiting patiently guys. As for those that have not bought them, we can take an order but we are still back ordered on them. We got enough in to fill this GB and about 5 more customers that had them on back order. So we'll begin the long wait for more....
JP
I paid for 4 x ITV22 today. How long would it take to see them delivered ?
Damn, these are on demand like HOTCAKES! lol Good to know they are on the way!
Just tell Denso "gimme all you got pronto" lol
Sent from my GT-I9100 using Tapatalk
So i'm assuming you have all our addresses or how does this work :S
Newbie FAQ My Build Thread
From stock, to GT3071, to substantially less modded, many lessons learned!
3" HTP | 100 Cel DP | Autotech HPFP | AP V3 - Self Tuned on E20 | JBR RSB | CPE S2 REM | JBR Shifter Bushings
Current:
CP-e: Xcel Nano Intake/ Nviscid TIP/ TMIC/ HPFP/ Stage 2 REM/xFlex Driv/ Pass EM 75/ UR 3" Turbo- Back Exhaust/ RichTune Custom/ HKS SSQV Typ 3/ DBA 4000 Rotors/ Remsa Pads/ Tein SS Coilovers/ Whiteline (F&R) Sway Bars/ AutoExe: Turbo Suction Kit/ Strut Tower Bar/ Floor Cross Bar/ Lower Arm Bar (F&R)/ Sports Steering Wheel/TWM: A6 Leopard Gearknob/ Solid Base Bushings/ Work: 11R-FT 18X8.5/ RS Lock Nuts/ CP-e Tow Plate/ Yokohama AD08Delivery/ Install: HKS EVC6/ JBR: Oil Catch Can
As I wait patiently for my Iridium Plugs I am wondering how do you adjust the gap without damaging the fragile Iridium tip. Some say don't adjust them as you are probably likely to damage the tip. So how do I adjust them using a set of feeler gauges. I have heard by just sliding the feeler gauge in can cause damage to the tip.
Thx for the video. Looks like it is possible to use a feeler gauge but with care.
And not levering the gap wider by using the tip
Using long nose pliers to lever the ground electrode would be the go I guess. Again taking care to not touch the tip.
I have used a blade screw driver(leaver off plug not tip on electode) and feeler gauges for gap. I wouldnt slide it back and forth across the tip as this will flaten/blunten it.
But i think i will employ Mav's idea with the pliers instead of screw driver
But what sorta gap should we gap it to?
Think its .8mm