User Tag List

Page 1 of 2 12 LastLast
Results 1 to 20 of 28

Thread: CPE Standback Reveiw for MPS6

  1. #1

    Default CPE Standback Reveiw for MPS6

    Thought i would kick this section off with this..

    Well what can I say,

    For a plug and play unit that can be installed by yourself in 30 mins it's awesome.

    My car now runs more power, more boost and i'm yet to have it dynoed but i reckon im getting around 220 @ all 4.

    I really recommend this to other MPS drivers.

    It comes with variable boost control with 2 maps that are flickable with by the flick of a switch. I have a daily driver and an agressive map(which CPE call it a Race Map).

    This is so much better than any competing products on the market. I had the Xede and it wasn't working for me so I switched and now im extatic!
    CorkSport FMIC with Cold Air Induction, , Cork Sport Cat Back, CPE Standback with PNP, TurboSmart BOV, Custom Highflow Cat with CorkSports Downpipe,Pauter Rods, CP Pistons,ARP Head Studs, BIGGER TURBO COMING, Pre-ordered a Stage 3 CPE Engine.

  2. #2

    Default

    I assume you don't have the TP flash? Do you know if CP-e will be offering it in someway down here?

  3. #3
    Join Date
    Nov 2008
    Location
    Brisbane
    Posts
    247
    Blog Entries
    8

    Default

    Good question
    Last edited by Swallowtail; 18-02-2009 at 10:14 AM.

  4. #4
    Join Date
    Nov 2008
    Location
    Gold Coast
    Posts
    1,165

    Default

    Quote Originally Posted by Nuliaj View Post
    I assume you don't have the TP flash? Do you know if CP-e will be offering it in someway down here?
    MPSgarage would be the likely candidates depending on

    a) the level of interest/return profit &
    b) the cost of the flash hardware, providing they sell it..

    Then, its still painful to send an ecu to them to have it flashed.
    Last edited by 2000MNLESS; 12-11-2008 at 05:08 PM.
    Quote Originally Posted by Street Road Laino View Post
    I'm never drinking again

  5. #5

    Default

    Would any Tuner be able to install and tune the Standback ? Or should u be clued up on them and Mazda MPS tuning... ??

    It sucks being up north... all the Tuners and People in the know are down south... grrrr... mps garage should have a road show... haha

  6. #6

    Default

    i believe if they are developing Maps for all different mods.

    So you have a intake, they would ship you a standback loaded with an intake only map.

    But everytime you change your mod's you will have to get new mods. That said, all you have to do is get them to email it to you and download it through a USB cable to the standback.

    I'm not sure if anyone has a standback on a MPS3 yet.

  7. #7
    Join Date
    Nov 2008
    Location
    Gold Coast
    Posts
    1,165

    Default

    Quote Originally Posted by lazydog View Post
    i believe if they are developing Maps for all different mods.

    So you have a intake, they would ship you a standback loaded with an intake only map.

    But everytime you change your mod's you will have to get new mods. That said, all you have to do is get them to email it to you and download it through a USB cable to the standback.

    I'm not sure if anyone has a standback on a MPS3 yet.
    Not in Australia, there are a few cars running around in the U.S with them.
    Quote Originally Posted by Street Road Laino View Post
    I'm never drinking again

  8. #8

    Default

    Standback sounds the goods if your planning decent mods thats for sure. But to get the full throttle control you still need another unit yes? sorry for my ingnorence, im used to using microtech's etc...

  9. #9
    Join Date
    Nov 2008
    Location
    Brisbane
    Age
    49
    Posts
    494

    Default

    TP control (full throttle) requires the ecu to be POSTED TO THE USA - not really an option for us yet....

    Standback can be dyno tuned by any perf shop - software provided.
    There is one for sale.

  10. #10

    Default

    Quote Originally Posted by jimred07 View Post
    TP control (full throttle) requires the ecu to be POSTED TO THE USA - not really an option for us yet....

    Fuk that, thats sucks. Someone needs to get on the ball down under.

  11. #11

    Default

    DUH.......

    I have a throttle control flash. If the demand is there, I'll look into a throttle ONLY flash..

  12. #12
    Join Date
    Nov 2008
    Location
    Gold Coast
    Posts
    1,165

    Default

    Quote Originally Posted by Sassimac View Post
    DUH.......

    I have a throttle control flash. If the demand is there, I'll look into a throttle ONLY flash..
    ease up Wayne
    Quote Originally Posted by Street Road Laino View Post
    I'm never drinking again

  13. #13

    Default

    I'll check if MPS Garage are going to bring the CPE Flash Down under.

    I hear the gains of the CPE flash are the best on the market!

  14. #14

    Default

    did i just go down on CPE again!


  15. #15
    Join Date
    Nov 2008
    Location
    Brisbane
    Age
    49
    Posts
    494

    Default

    Still need to part with your ECU if not sydney based

  16. #16
    Join Date
    Nov 2008
    Location
    Gold Coast
    Posts
    1,165

    Default

    Quote Originally Posted by lazydog View Post
    did i just go down on CPE again!

    Sure did!!
    Quote Originally Posted by Street Road Laino View Post
    I'm never drinking again

  17. #17

    Default

    ...

    Might be time for MPS Garage to go on a road show to QLD and VIC!


  18. #18

    Default

    Quote Originally Posted by Sassimac View Post
    DUH.......

    I have a throttle control flash. If the demand is there, I'll look into a throttle ONLY flash..

    I DEMAND you look into a throttle only flash!!


    Hope that helps.


  19. #19
    Join Date
    Nov 2008
    Location
    Brisbane
    Posts
    247
    Blog Entries
    8

    Default

    [offtopic]
    Racebitz - in your sig do you mean bust as in "run out of money" bust, or bust as in "oh b*gger I broke it" bust?
    [/offtopic]

  20. #20
    Join Date
    Nov 2008
    Location
    Wyong
    Posts
    1,423
    Blog Entries
    3

    Default

    Both me thinks...lol

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •