got a video of how the beast runs?
Type: Posts; User: allo80
got a video of how the beast runs?
Supercheap auto do a code reading service starting at 14 bucks: Vehicle Diagnostics Powered by Bosch - Supercheap Auto Australia
Yeah, i can see the check boxes for SWAS removal for 1st and 2nd Gear in ATR. Wonder why they havent got it working for other gears when the Ecutec can do it.
Well hopefully Cobb will provide an update with the said table unlocked
Congrats on the purchase and welcome
Brand: Bridgestone
Model: Potenza Adrenaline RE003
Price (fitted/unfitted): $642 for four ($160.5 each) (4 for 3 Bridgestone promo), normally $214 each
Bought from: Bridgestone St Albans VIC...
You were right Lachlan, I got new tyres put on, and had an alignment completed, looks like the front toe was out.
17738
Haven't had a rotation recently, but I'm thinking rubbing as I did see a wear spot on the lining/mounding. I'll check toe/camber settings. Might also compress the suspension to see if it is indeed...
Hi All,
Looking for some advice on whether people have had their stock sized wheels rub on the inner wheel arch moulding/lining and what can be done about it.
Went to replace the front brakes...
Read guides, learn, read the workshop manual, and for servicing requirements have a look at the car manual
I vote 5. In the datalog5 there are two sections where your AFR's are pig rich, which is visually confirmed in the bond 007 smoke screen coming from the back of your car. SWAS can kick in even in a...
I vote AP as it has ability to monitor engine parameters via OBD and also flash back to stock tune or any other tune you may get (e-tune or self tune) at will
Rear sway bar is a popular mod and very streetable. You can get the adjustable versions that allow control of stiffness of the sway bar
You might need new front end links if the mounting positions are longer or shorter than OEM
Considered a Rear Sway Bar?
I installed superpro bushes, can be had for under 25 bucks. I got the 25mm ones and were fine for the front sway
yep, i had the same decision in terms of springs. GSL rallysport suggested that the kings were better matched for the B8s, and thats what i went with. I have a gen 2 MPS3. There are a few MPS3's...
If it's fluttering (fully sick sound) on throttle lift off or gear change then the valve is too stiffly sprung
beautiful work!
If you bought the BPV then it comes with springs n shins. The separate spring kit is good if you lost some springs etc
you'll need to remove it to change springs or shims. The hardest part of the install/removal is getting that hose clamp on/off. other than that its two 10mm bolts.
Awesome, congrats SarcasticOne... Good to see ozmpsclub represent!
Agree, the car wakes up with even a stage 1 tune thanks to boost restrictions being lifted
welcome and congrats on the purchase
Joined, thanks for the heads up :)
oil filled one is the driver's side one (or the passenger side in the US). The other mount is the "transmission" motor mount.