+1 install day........ Wanna do my REM at the same time since im under there too!!!
Type: Posts; User: KLEEMO
+1 install day........ Wanna do my REM at the same time since im under there too!!!
In the MPS 6 there is also a blank factory grommet not used behind the accelerator as our cars are DBW and i guess the standard Mazda 6's arent?
i used this route then ducted it up behind the...
Got the following to install
- SURE REM
- SURE Anchors
- SURE Counter Shift
- SURE Breather line kit
- HDI FMIC
- & a whole heap of Braided hoses & Silicone to replace every ugly black...
Just ordered one with 4 other items from SURE & SU
Anyone installed one yet?
I use an AEM Boost Solenoid unit
My Sure REM R6 is on the way cant wait to get under there and give it a go...........got quite a few new toys arriving soon.
Ive been laying dormant for a while now.............& the bugs come back...
No point tuning the car without mods done first.
Start with SRI - Exhaust - then Tune it all.
As others have said don't do it unless you have/ are planning other supportive tuning fuel mods!!!
My bros about to 100% covert his R34 Skyline Track car to E85………… but by no means is there one...
Id never use the brush at a car wash too, not even if you paid me...................
I tend to wash mine at home or go to a trusted car wash cafe where they do it by hand!!!
Haven't had that problem........ But when I installed the TIP I did remove a metal bracket that held those wires so it wouldn't rub/ foul the tip
Not yet........don't really have a recording device..........unless I try the iphone
Having recently installed the MZR TIP in my case it certainly comes on much sooner now Around 2,000RPM depening gears
Noise is great (in sucking) and when releasing throttle it has a pidgeon like...
Welcome………..& to add to above post give a 2XS SSP a try courtesy of Troy on here!!!
Dont Laugh.............But get White Vinegar in a spray bottle and a soft sponge/scour pad (like dish wand)..............Vinegar will Eat through it all!!!
Trust me on this..............
lol yeah soft office desk job hands i have!!!
oh well pains worth it all now!!!
on my hands………..lol i wouldn't make a good traddie!!!
Well its in (after many cuts)......................sound is deeper (woosh/fluttering sound) than before...................and spool is on much earlier than i expected!!! under 2000rpm now
Yeah ive got a 6 MPS (thanks for thinking of me) Ill keep it in the garage untill someone needs it!!!
Your welcome to it..............if you wanna do a round foglight conversion from the more...
GOOD to know/hear!!! tempted to even do it now in the carpark behind work!!!
Just bought a MZR intake pipe myself……..sitting in my car waiting to be installed!!!
(hopefully ill get home from work one night early enough to do it)!!!
Polyutheraine (no idea how to spell) is your friend!!!
bend mesh to shape of duct then glue rear attachments in there!!!
LOL Thanks!!!
I'd be thinking to put them on an angle like my dodgey job below!!!
goes with the lines/ angle of your lights!!!
Ill ask him as he lives there and works locally (Lexus of Brighton) so possibily get them deliever to his work & your courier could pick them up from there???
PLX Devices Inc. - Multi Gauges, Single Gauges, Sensor Modules, Wideband Air Fuel Ratio, Data Logging, Fuel Saving / Scan Tools
Reminds me of this??? Love all the extra features!!!
My Brother lives in that area & Im often around there!!!