Need some help - MSF VIP - Mazda PID's

[SarcasticOne]

hi,

was just wondering if anyone here has a VIP membership on mazdaspeedforums

just have a simple(ish) request...

YouTube - Android Torque Mazdaspeed PIDs this video says that all the Mazda specific PID's are on the VIP forums, can someone please search for them, grab them, and put them on here?

things such as LTFT, Knock Retard and AFR would be fantastic!

obviously i dont have a VIP membership, else i wouldnt be asking, and if this is against rules/etc, i apologise!

Thanks

[Toddy22587]

I'd also like this info

How do you become VIP? can you just make a small donation

[darkness]

I'd also like this info

How do you become VIP? can you just make a small donation

i think thats how it works. I might make a donation, see if I can sort that.

[SarcasticOne]

Think much like this forum need to make a donation of a couple of $$$ know there is a few people here that are definitely members, matt is a moderator not sure about VIP though, figured I would ask

[darkness]

bingo got access. Theres a couple threads about Torque and PIDs. Give me some time to decipher things and I'll make a shortened version of the info for here.

---------- Post added at 10:01 PM ---------- Previous post was at 09:49 PM ----------

Ok haven't tested these yet, But credit to the MSF guys for these, they've obviously done a lot of work to figure them out. No word on Knock Retard yet.

PIDS that work out of the box with Torque:
Load
Fuel Level
RPM
Intake Temp
Intake manifold pressure(in kPa)
Coolant Temp
Vacuum/Boost Gauge
Barometric Pressure
Mass air flow rate(in g/s not voltage)
Throttle Position
Timing Advance(Works, at WOT shows near 0 degrees. Yay stock tune!)

Enhanced PIDs you have to manually enter
Long name & short name can be whatever you want. I tried to stick to conventional names.

LTFT Long Term Fuel Trim?
OBD2 PID: 0107
Long Name: LTFT
Short Name: LTFT
Minimum Value: -25
Maximum Value: 25
Scale Factor: x1
Unit Type: %
Equation: (A-128)*100/128
Gen 1 Status:
Gen 2 Status: Working and confirmed
MS6 Status:

STFT Short Term Fuel Trim?
OBD2 PID: 0106
Long Name: STFT
Short Name: STFT
Minimum Value: -25
Maximum Value: 25
Scale Factor: x1
Unit Type: %
Equation: (A-128)*100/128
Gen 1 Status:
Gen 2 Status: Working and confirmed
MS6 Status:

Fuel Pressure
OBD2 PID: 0123
Long Name: FP
Short Name: FP
Minimum Value: 0
Maximum Value: 2500
Scale Factor: x1
Unit Type: %
Equation: (A*256+B)*10*.145
Gen 1 Status:
Gen 2 Status: Working and confirmed
MS6 Status:

Open Loop Commanded Air/Fuel Ratio
OBD2 PID: 0144
Long Name: AFR
Short Name: AFR
Minimum Value: 0
Maximum Value: 20
Scale Factor: x1
Unit Type: A/F
Equation: (A*256+B)/32768*14.7
Gen 1 Status:
Gen 2 Status: Working and confirmed
MS6 Status:

OEM Wideband Air/Fuel Ratio
OBD2 PID: 0134
Long Name: WAFR
Short Name: WAFR
Minimum Value: 0
Maximum Value: 20
Scale Factor: x1
Unit Type: A/F
Equation: (A*256+B)/32768*14.7
Gen 1 Status:
Gen 2 Status: Working and confirmed
MS6 Status:

Cat Temp
OBD2 PID: 013c
Long Name: Cat Temp
Short Name: Cat Temp
Minimum Value: 0
Maximum Value: 2000
Scale Factor: x1
Unit Type: F
Equation: ((A*256+B)/10-40)*1.8+32
Gen 1 Status:
Gen 2 Status: Working and confirmed
MS6 Status:

Absolute Load
OBD2 PID: 0143
Long Name: Abs Load
Short Name: Abs Load
Minimum Value: 0
Maximum Value: 255
Scale Factor: x1
Unit Type: %
Equation: (A*256+B)*100/255
Gen 1 Status:
Gen 2 Status: Working and confirmed
MS6 Status:

Intake Manifold Absolute Pressure
OBD2 PID: 010b
Long Name: IMAP
Short Name: IMAP
Minimum Value: 0
Maximum Value: 100
Scale Factor: x1
Unit Type: PSI
Equation: A*.145
Gen 1 Status:
Gen 2 Status: Working and confirmed
MS6 Status:

[SarcasticOne]

if you ever come to sydney i owe you a beer
funny thing is, it's already 4 result on google for "mazdaspeed PID"

[darkness]

You're on , now to see if they work as advertised.

[naasif]

Any update on the knock retard PID for the 2010 yet ?

[MPS2NV]

Gen 1 MAF pid should indicate 0.25 ib/min or above at idle, is this the kinda stuff your looking for?