User Tag List

Page 2 of 2 FirstFirst 12
Results 21 to 25 of 25

Thread: MPS Tech Specs?

  1. #21

    Default

    Ha, yes, 3071 is also a good sized turbo, but 2871 is too small for a 2.3 to make real power. My brother has a 2.0 Litre evo with a 3076, spools a little late, luckily the mazda is a 2.3, makes it spot on. If your gunna go to the effort of replacing your turbo, do it properly. Lag isn't nessicarily bad, means you can drive your car off boost far easier.

  2. #22

    Default

    so does the 3071 or 2871 bolt strait up or is that a manifold job?????

  3. #23

    Default

    All the Garrett Turbo's have a different bolt pattern to the standard MPS turbo, so yes, in the same boat as the 3076.

  4. #24

    Default

    ATP make bolt on 2871 3071 3076 and 3571's for the MPS.. reuse your manifold and your downpipe...

    however the oil lines and what not are usually a little tricky so im told.

    Im going to be getting the k04 rebuilt with either gt28 or 30 ball bearing internals which I have been told is defiantly do-able... This will only be fitted after the warranty totally runs out in a few months.

    Doc

  5. #25

    Default

    Awsome Doc look forward to hearing how u go with that!!!! and exciting to see what u get on dyno!!!

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •