Louder induction noise

[Ice429]

Hi guys

just a few questions about the mps. I have the 6 mps and was wondering how I get a louder spool noise.

Cheers

chris

[STEALTH_MPS]

cold air intake(CAI) or short ram intake(SRI)

[Jmac]

^^ What Chris said

http://mpsgarage.com.au/shop/search/...ps-intake.html

[Ice429]

So like a pod filter?

[BradstaMS]

Indeed!

[Jmac]

So like a pod filter?

Basically. But you need to be careful about the diameter of the piping. If it is larger than stock you may get some strange issues (cutting, flat spots etc).

you can look at an SRI (Short Ram Intake) like this;
http://mpsgarage.com.au/shop/product...ke-system.html
Easier to install and remove, less restrictive than stock.

Or a CAI (Cold Air Intake) like this;
http://mpsgarage.com.au/shop/product...ir-intake.html
Harder to install, generally get lower IAT (Inlet Air Temp)

[03blk]

Yep.

After going in some of the Cairns boys MPS3's with SRI's I can say the induction noise is great.

[shakespeare]

Love my induction noise with the CP-e CAI, sometimes at low revs sounds like an angry vacuum cleaner, but as the revs build the sound gets sweeter! Have to take you for a spin one day

[Ice429]

Wouldnt a CAI system mess with the cars Air intake sensors? I remember on my Falcon i had the CAI completly messed up the fuel economy

[Nuliaj]

That's cause the CAI you bought probably wasn't meant for your falcon, or was poorly built. In our cars the air sensor or MAF works off electrical signals based on the rate of air that passes over it. But in order to do this, it must know the volume of air, which is determined by the size of the diameter of the CAI or SRI. If you get one too big, then you're getting more air than the ECU thinks, and opposite for too small. That's how you mess up your air fuel ratios. Get a CAI/SRI that's designed for your system and you will be fine.

Also if you want the loudest induction sound, get one made of metal rather than silcon/plastic.