I have a Gen1 3MPS. Have moved to 18x8 +50 rims with 235/40/18 tyres and have noticed no change to the turning circle, and I do u turns regularly.
Type: Posts; User: WispRush
I have a Gen1 3MPS. Have moved to 18x8 +50 rims with 235/40/18 tyres and have noticed no change to the turning circle, and I do u turns regularly.
My assumption is that replacing the 2 mounts will put more strain on the last oem mount, but have no evidence. From some of my reading before I bought mine, people found the NVH reduced after...
I have had the mounts on since November last year. The JBR transmission one looks interesting, vertical design, where the CPE and SU are horizontal.
Interesting to see how it goes.
Streetunit only have the one option. Says "solid 68-72A durometer urethane" on their website
I have a gen1 3MPS and I have the streetunit side mounts. I get a fair amount of transmission whine and clunks from the gearbox, but I love the feel of car though, feels so connected, and the vibes...
I got a replacement endlink (OEM) from the US for about $72AUD with shipping. The endlink was $26 with the rest shipping so would be about $110 for 2.
I got them from here
...
I am with optus and my signal at home is atrocious, lucky to get 1 bar in the house. I have to go outside to make a phone call. Was thinking of going to Telstra, but tried out a Vodafone Sim...
10138
My new rims. Enkei Fujin 18x8 +50
I did that ages ago. At least I know I am not the only one.
The streetunit mounts come as a set. Can't buy them seperately. Would be good to hear what you think of them since my drivers side (Transmission) mount needs replacing.
I used to have this clunk. I have installed a 2XS SSP, 2XS shifter Bushing and a 75duro CPE rear engine mount and now have no clunk.
This is what shifts should have been like from stock.
Paperwork definately says front engine mount. I think they don't really know what they are doing (what a suprise for a stealership) or they just have a different name than anybody else for one of the...
Mazda definatley said the front engine mount (already have replaced the rear engone mount), will double check what the paperworks says when I get home.
Maybe they actualy meant a side engine...
Any followup on this. Did you manage to get it to fit properly.
My front mount needs to be replace after only 21k kms so not wanting to put another stock one in.
You can get the Whiteline rear sway bar from repco, they will have to order it in. A lot cheaper than straight from whiteline.
Standard chrome install. I am a nerd, but a lazy one, so can't be bothered with extensions.
I will test again with my desktop. I have FF and chrome installed on that one. Will test when I get my...
Windows 7 64 bit. On both desktop and laptop.
I am using the same version of chrome on both by desktop and laptop and I do not have that problem.
You can get the whiteline rear sway bar from Repco for $225. A lot cheaper than buying straight through whiteline.
I had a 75duro CPE rear engine mount installed on the weekend. With aircon off, vibes are what it was like with stock engine mount and aircon on, and with the aircon on, a lot of vibes. More than i...
Just a note, I asked for a quote from Tirerack, and they said they cannot ship OZ wheels outside of North America. There could be limitations on other brands aswell.
They are the same size as RX-8 rims. You can have a look at what other people have on them.
Both of those together cost $1256 before shipping cost, so you will have to pay GST on those, and...
Isn't it the Koni FSD's which are bolt on and the Koni Yellow that require more work to fit.
Not sure I needed 2 but you never know. Finally got around to placing a order I have been meaning to do for ages.
Just a note. There is a cruise on the 27th of march in Adelaide.
http://www.ozmpsclub.com/forum/club-cruises-social-events/8862-barossa-through-hills-cruise-sunday-27th-march-2011-a.html