SURE Aeros and Sidewinder setup

[ppham]

I recently have the SURE Aeros and Sidewinder setup in my MPS6 (05). Well, the only problem i faced was reconnecting the factory hose to the Aeros. It was too short and doesn't reach the Aeros. So i ended up buying an insulated hose from Repco for like $20 and then measured it so it would fit into the Aeros.

Here are the pics:

2012-01-14 15.07.02.jpg Fabricated hose from Repco (top), factory hose (bottom)

2012-01-14 14.59.42.jpg Repco hose fabricated to fit.

2012-01-14 15.11.55.jpg Factory hose, doesn't fit.

2012-01-14 15.13.45.jpg Gap of the factory hose.

Anyone with this setup experience this kind of problem? Btw the car drives normal and no problems encountered. Great sound!
It just bothers me that I had couldn't reuse the factory hose. And seems like the guys from the U.S have no issues with this at all.

Thanks in advance.

[ppham]

Thinking there might be a issue here with the 2005 model. Since in the US, they only have Mazdaspeed 6 in years 2006 and 2007. So I wonder if the 2005 model has a slightly different configuration...Can anyone confirm this?
Might follow this up to SURE.

[High on PSI]

The 05 and 06 is different, Mark from SURE Motorsports told me when I wanted to buy the "Return" recirculation hose from them.

---------- Post added at 01:44 PM ---------- Previous post was at 01:42 PM ----------

Oh this is the other hose... I thought you were talking about the BOV recirc hose.

Well you can always replace that hose with breathers

[ppham]

Noob Question: Could you explain what breathers are?

[STEALTH_MPS]

would like to know that question as well

[MZSPD6]

A breather is a very small filter much like pod filter but used to vent oil vapors to the atmosphere instead of back in to the intake system. I would prefer a catch can setup :-)


---
I am here: http://tapatalk.com/map.php?mhnh3d