FINALLY photo of my fmic on mps 6

[auscer]

575.jpg Its not complete yet i need to raise it bout 2 inches and put bottom lip back on but it should b done on my 3 weeks off ill post another one when i do it

[Doug_MPS6]

If you raise it, put some anti-chafe such as rubber insertion underneath it , between the radiator support member and the base of the FMIC.

[auscer]

Oh ok wats the theory with that??

[duglet]

So you don't scrub your bumper

Sent from my Galaxy Nexus using Tapatalk

[High on PSI]

that looks f***ing mean!

What fmic is it?

[blackbetty]

Looks great Will, really suits the aggressive front end of the 6

[Scaredycrow]

Looks good, definitely needs to be lifted up though.

[Doug_MPS6]

Whether or not you can get any anti-chafe under it depends on its shape, plumbing flexibility and core thickness really. Yours looks quite low and set well forward, and I'm assuming inlet and outlets are on the same level, and you might be a bit restricted as to how much you can lift it. Mine sits on my radiator cross-support. It has a sloping top edge but some self-adhesive rubber insertion still gives it a good cushion to sit on. They are quite heavy things and tend to bounce a bit on rough surfaces, so any protection you can give it is a good thing.

[Yeldarb]

Gee that is low, but looks good Will.

[auscer]

Ahahaha yeh by the time I lift it up it will b alright.... I hav bout 2 inches to lift and one intercooler pipe to shorten but no dramas.... I put some bp ultimate in today n what a difference it makes my performance feels so good it feels like so much more power atw

---------- Post added at 06:49 PM ---------- Previous post was at 06:45 PM ----------

Doug mine sits off the crash bar on the back side so I thinks its good place ill take a pic and show when I shorten my ic pipe to show a good view of where it sits