
Got a pair of LED lights the other day for my fog lights, and i have no idea how to install them!!
What is the best way to go about attempting a job like this? I looked under the bonnet and realised that it was too hard for me to do it through that way, so is it better to just jack up both sides of the front of the car and do it from the bottom? Do i need to remove anything from the car to get to the Fog Lights?

There are 3 (Philips head) screws under each side of the front corner of the bar.
Remove these to allow access to the rear of the foglight .
Unclip the foglight bulb plug.
Twist and pull out the foglight bulb.
Installation is a reverse of the above procedure.
All this can be done while the car is on the ground (easier if the car is at stock height)
11gen2mps thanked for this post

There's probably a manual in the glovebox. I found this very useful
Hope they're H11's. The first set I ever bought were 9006. If only I'd read the manual.
Drop in some pics when you have them done!