Will they fit?

Hi All,

Since I am having some difficulty locating a single MPS 6 rim (found 1 brand new one for $350, but would look silly on the car with my 3 scuffed ones) I am looking at aftermarket wheel options, since it is time for new tyres anyway. I have read numerous posts about wheel fitment, but have not found a definitive answer as yet, so at risk of starting another flame fest...

Will 18*8 45 offset fit without rubbing? Some posts say yes, some say no...

I am looking to run the falcodore standard 235/40/18 tyre, and handling is more important to me than "fitment".

Thanks,

Chris.

Here are my experiences:

1. Not lowered, running 225/40, on stock rims (18x7, 50 offset), does not require rear guard rolling;
2. Not lowered, running 225/40, 18x8 45 offset does not require rear guard rolling;
3. Lowered on stock rim running 225/40/18 requires roll to the rear guards
4. Lowered on 18x8 45 offset with 225/40 tyres requires roll to the rear guards;
3. Lowered, 18x8 45+ offset, running 235/40 tyres, rears guards will need further roll (front part, near the rear doors)

Is your car lowered?

Not lowered at this stage, until the council fix the road... I scrape on the driveway already... :(

Another option I have found is an 18*7.5 +45... sound like these should fit under nicely, but will they take a 235 wide tyre?

Chris.

Quote:

---

Originally Posted by mazda6mps

Here are my experiences:

1. Not lowered, running 225/40, on stock rims (18x7, 50 offset), does not require rear guard rolling

---

I think the stock wheels are 55 offset as I had one off last week and checked it

Quote:

---

Originally Posted by andy b

I think the stock wheels are 55 offset as I had one off last week and checked it

---

I concur... I looked at this the other night, but it was dark, and I thought I may have misread it, as everyone else seems convinced they are 52.5... ?

Chris.

Sigh... some research today has tyre people telling me that 235/40 is an illegal fitment onto a 7.5" wide rim. And ROH tell me that the rim I want in an 18*8 will not fit the MPS...

This leaves me with the option of some OZ racing wheels, 18*8+55 @ approx $600 each, or 225/45/18 tyres at $400 each for decent ones, or cheap crap...

One guy did try to sell me on some Hankook K114's in a 225/45/18 for $255 each... these any good?

Chris.

235/40 on 18x7.5 is an illegal fitment : for MOST but NOT all 235/40R18 tyres.
+55 isn't a legal offset either.
Your _legal_ offset range is from +40 to +52.5
Double check that +55 offset for OEM rims - I am confident that is _wrong_ and the correct value is +52.5
If you want to use 8" wide you can (possibly contrary to ROH advice), but the offset should be as high as possible - preferable +48 to +52. +45 should be OK, but it would be borderline, and with any of the 8" wide fitments you should consider you will need to roll rear gaurds. The lower the offset, the more trouble the fitment will be in terms of rubbing and what you might have to do to resolve that.
RX-8 whee;s are 18x8+50 and that's a decent fitment, but does run close to guards with 235/40 wrapped around them.
Can't comment on the hankook, but 225/45R18 on 18x7.5 is a good fitment....+48 is what I consider the ideal offset for this fit...because it placed the tyres inside track within 0.5mm of the stock position.

Chris you will definately get rubbing on sharp bumps and with passengers in the rear running 18x8 +45 with 235/40/18 tyres, I run exactly that Im not lowered and needed my rear guards rolled as the outside 2 - 3mm on the tyre was rubbing on the inside edge of the guard which sits out at 90 degree angle

Quote:

---

Originally Posted by Nexus

Double check that +55 offset for OEM rims - I am confident that is _wrong_ and the correct value is +52.5

---

I had a wheel off last Sunday and checked because I have a cracked rim and am trying to figure out if a 18x7.5" +60 wheel from the current M6 will fit

Sorry to hi-jack the thread but i'm looking at some XXR 527:

http://i1203.photobucket.com/albums/...527-FBLACK.jpg

The thinnest size is 8.75 wide :( what offset would be needed to fit these on the MPS3 for 235/40 considering im very low.... Or is it time to choose a different rim?

HI-JACK AWAY BABY!!!!

/me is watching Austin powers... :p

Methinks 8.75 wide is not gonna fit at all... :(

Chris.

Quote:

---

Originally Posted by Bakis

Sorry to hi-jack the thread but i'm looking at some XXR 527:

http://i1203.photobucket.com/albums/...527-FBLACK.jpg

The thinnest size is 8.75 wide :( what offset would be needed to fit these on the MPS3 for 235/40 considering im very low.... Or is it time to choose a different rim?

---

Depends how low u are, I'm lowered 25mm on front and 35mm rear, and just fitted 8.5's with 235x40x18 tyres, offset +48, and could easily go wider, or lower offset, but probably not both (I reckon either go to 255's, or go a +40 offset).


Sent from my iPhone using Crapatalk

Well im this low... Not sure in mm but here is the pic:

http://i253.photobucket.com/albums/h...azdaMPS-24.jpg

I know i need to roll guards either way.

But in a 18*8.5 rim with a 235/40/18 tyre what offset would be best to make it the rim and guard flush?

Then the same question for a 18*8.75 rim.

Has anyone successfully run 245s on a MPS 3 front and rear without heavy guard work?