Opinion on my soon to be tyre/wheel setup

[Matto]

Hey guys I convinced my mum that getting new rims and tyres will still be cheaper to get from the US than just getting tyres here so I've decided I want the Enkei Imola's in black and the BF Goodrich g-Force T/A KDW 2

Just wondering will I need to run different tyres instead of 215/45/18 as the Imola's have a 50 offset? I'm a real noob when it comes to all this so would like to confirm it and get some opinions. Cheers.

[Nirvandan]

Depens how wide the rims are.

Stock rims are 7' wide for the Gen1 and tyres are 215/45/18

So the wider the rims are i.e: 8', 8.5' etc .....you can fit wider tyres i.e: 225, 235 etc

[TD]

Depens how wide the rims are.

Stock rims are 7.5 wide for the Gen1 and tyres are 215/45/18

So the wider the rims are i.e: 8', 8.5' etc .....you can fit wider tyres i.e: 225, 235 etc

Stockies for the Gen1 are 7" wide and +52.5 offset...

Matto, what exact wheel size are you ordering? Post a link.

No point sticking with 215 tyres if you're upgrading the entire package. I assume by Nirvandan's answer that you own a Gen1 3MPS?

[Matto]

Enkei Performance Imola Black Painted

and
BFGoodrich g-Force T/A KDW 2

---------- Post added at 03:20 PM ---------- Previous post was at 03:19 PM ----------

and yep 06 gen 1

[Nirvandan]

Hahaha cheers TD

---------- Post added at 05:26 PM ---------- Previous post was at 05:24 PM ----------

Its a 8' wide rim so you can fit 235/40/18 tyres

[WispRush]

They are the same size as RX-8 rims. You can have a look at what other people have on them.

Both of those together cost $1256 before shipping cost, so you will have to pay GST on those, and probably an admin fee aswell. The GST is on the item cost+the shipping, so all up may be about $200 extra. You can split the order but the shipping cost will increase.

[TD]

Never mind, found em on tirerack.com, and found that you have a 2006 3 MPS.

They're an 18x8 rim, so the ideal tyre size is 235/40R18, you could also run 225/40R18 or 225/45R18 on them. With 235 tyres you may require guard rolling (especially in the rear) so they don't rub.

Those tyres are an interesting choice, I'd caution against buying them, the load rating is 95XL in 235/40R18 size which will mean a very harsh ride.

Other tyre choices on tirerack you might want to look at which may be better suited due to lower load rating (and are under US$200 a corner) are:
- Continental ExtremeContact DW (91W load rating/serv desc version, not the 95XL)
- Pirelli PZero Nero
- BFGoodrich g-Force Sport
- Dunlop Direzza DZ101

When reading the reviews on tyres there, go by car first (so for you a 2007 Mazdaspeed 3), then by location. Try to find reviews from people who live in the warmer states like Texas, Arizona, California, Florida etc as these are the best comparison for Australian conditions.

I will caution that if you really don't know what you're buying, pony up the extra $ and buy local. The advice you will get locally comes with the price. As the saying goes, buyer beware. It's tempting to buy from over in the USA at the moment but you really gotta know what to get and why you're getting it before hitting the order button, otherwise your bargain could turn into an expensive mistake.

Maybe just grab the wheels and go local on the tyres?

Good luck.

[Matto]

Yeah to be honest I don't that's why I wanted your opinions, I think I may have to do that or just buy new tyres for my current wheels.. I'm actually not that fussed on 'ride quality' since I really only drive maybe 15-30 minutes a day? and in suburban areas so the roads are in fairly good condition and usually if I go for a longer drive I just go take my mums commander.

I'm not to keen on rolling my guards.. though you mention that 235 is the ideal size does that mean if I run 225 I will encounter problems?

[luke 3mps]

I like higher rated kg load tyres, as i live on rough roads. Less likely to damage a rim harder side walls ( correct me if im wrong )

[03blk]

You will be fine with 225/40/18 on your 18x8 rims. I have this on the front of my Gen 1 on RX8 rims and they are a very popular tyre size in the US. They fit snug and give minimal flex so handling is great. You're rolling diameter is slightly reduced from the 215/45 but isn't really noticeable.

Yes; you'll need a better weight rating than that.

I went for Yokohama S Drives from Tire Rack; all up $850 delivered. They are great tyres and several members run them on their Gen 1s.

Consider this also; 18x8 & 50 offset will have your inner rims 11mm closer to the shocks than standard. With my BC Coilovers with their broader shock barrel I have very little inner shock to rim clearance: so 235/40 would have likely rubbed.

The rears have more clearance and I can't see much rubbing issues with 225 or 235 unless your going to run quite low.