19's on my "05 Maz3 SP23

[RED3VIL]

So these are the rims im looking to get:

Tech 9 Tyres - Wheels: TENZO-R Tracer MB



Ive told they will fit on the vehicle, but to be honest i dont believe them
Especially after what the last workshop told me with the current wheels i have fitted

Car is lowered approx 40mm on Teins
WHat do you think, can i fit these as 19's or are they gonna be too fat ??

Just found specs:

19x8.5
5x100/114.3
Offset 45
CB 73.1
11.33kg

[Nexus]

Not enough info.
If they are wider than 8" then I don't expect a good fit.
If they are 8" wide, then offsets of +48 to +52 are good.
If it was an MPS i'd tell you to run 235/35R19 or 225/40R19
If it's a +45 offset, then it's a fit, but IMO it's not a great fit, it will need gaurds rolled etc. Any of 'em prob need gaurds rolled.

[rogwick]

Dark rims = Win! As long as you get round to doing your callipers mate!!

[shakespeare]

I like the look of them Matt, will suit your new paint work nicely

Nexus' input is valid, you'd need to get some more info on the offset which will in turn help you with tyre decisions. FWIW I've got 19x8 on the Golf with 235/35/19 bumps are more apparent with the 35 series rubber though not too harsh on our roads in Perth

[LittleredMPS]

Agree with the above, the offset and width are going to be the kicker's on whether they will fit, with you car being lowered.

If you run 235/35-19 tyres you will have the same diameter as stock. 225/40-19 will probably cause you grief though.

[Yeldarb]

I know jack about offsets, that's why I need you guys... But the wheels are very nice. 5 spoke, matt black??? Great look. Bet you're selling your other kidney for them!!!

[RED3VIL]

Thanks for the feedback everyone
Im still at work an at the moment i cant view the offset info etc on that webpage
Im not sure its it the I.T. blocking software or if the webpage is playing up
As soon as i can get specs i'll update the post for you

Yeldarb: Suprising not quite a kidney, about $2600 with rubber
I think i paid more for the current P.O.S. Rodney Jane racing Rims i have ...

Rogwick: Painting calipers is too much effort :P
Will see if i can find someone to do them for me

EDIT: Have just found the specs of the net:

19x8.5
5x100/114.3
Offset 45
CB 73.1
11.33kg

[rogwick]

Rogwick: Painting calipers is too much effort :P
Will see if i can find someone to do them for me

The funny thing is, when I look at your car the last thing I think of is a "lazy owner" What sort of places will do callipers?
Btw I saw a Holden statesman the other day with the plate "REDEVIL" (without the 3) His car just had rims though and was dirty and boring

[RED3VIL]

Thanks Mate, there is a few combination's of the plate going around
Ive had a few contacts to a few places, but am looking to find somewhere closer
Its not a cheap exercise for a workshop to do either ...

[Nexus]

I can't remember the CB off hand, so can't confirm or otherwise on that.

19x8.5
5x100/114.3
Offset 45
CB 73.1
11.33kg

I would try to get it in 19x8, and higher offset if possible. 19x8+45 should be good and doable however you'll need gaurd clearance attended to.
If you go the extra 0.5" @ 19x8.5, the clearance issues might be more than you bargained for. Wheel face will be flush with the panelwork @ 8" wide +45 offset.

8.5" and they'll stick out another 0.25" - you can pull them in 7mm if you get +52 offset, and the 8.5" wide wheel face would be flush again. Not sure how you'd go for inner clearance then. Might start to rub strut bits.