User Tag List

Page 1 of 3 123 LastLast
Results 1 to 20 of 50

Thread: Corksport End Links

  1. #1
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default Corksport End Links

    I'm just about to install my Corksport End Links. Lets see how they go! SO far I have had OEM lasted a few weeks, Moog lasted 6-8 Weeks, Mevotech lasted1 week. Lets see how the Corksport hold up! The Corksport are heavy and look the part. They are a longer than the other non adjustable End links even on there lowest setting. The ball joints are small but are they stronger than the others? We will find out!
    Many want Power not many hold it long.........

  2. Default

    Quote Originally Posted by RedDjinn View Post
    I'm just about to install my Corksport End Links. Lets see how they go! SO far I have had OEM lasted a few weeks, Moog lasted 6-8 Weeks, Mevotech lasted1 week. Lets see how the Corksport hold up! The Corksport are heavy and look the part. They are a longer than the other non adjustable End links even on there lowest setting. The ball joints are small but are they stronger than the others? We will find out!
    Good luck, keep us posted!

  3. #3
    Join Date
    Apr 2012
    Location
    South Perth, Western Australia
    Posts
    400

    Default

    Interesting, subbed.
    How have you gone through so many sets?

  4. #4

    Default

    Also subbed. Please keep on with the updates

    Hopefully you've found something solid that doesn't clunk like a mofo.

  5. #5

    Default

    Good luck. Thought I might add to suggest reseating the swaybay in their brackets just in case there's some anomaly there.

  6. #6
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default

    Quote Originally Posted by lup15 View Post
    Good luck. Thought I might add to suggest reseating the swaybay in their brackets just in case there's some anomaly there.
    doubt it all looks ok, every set I have taken out I can get them to knock in my hands :P.. Im very hard on endlinks...
    Many want Power not many hold it long.........

  7. #7
    Join Date
    Dec 2010
    Location
    Sunshine Coast, QLD
    Posts
    458

    Default

    is it the upper ball the is creating the knock/allowing extra movement?

  8. #8

    Default

    I suspect the longer end links will reduce the angle & stress on the ball joints.
    Here's hoping they work!

  9. #9
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default

    If you run after market sway bars we are cursed with end link knock! The corksport is knocking, The left rear has movement. If you want the longest lasting end links get Moogs!

  10. #10
    Join Date
    Dec 2010
    Location
    Sunshine Coast, QLD
    Posts
    458

    Default

    what/part section of the link has movement?

  11. #11
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default

    Upper ball, in all cases this was the issue

    - - - Updated - - -

    I honestly think the casing is spreading

  12. #12
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default

    2 X NEW Rear Sway BAR Link FOR Ford Falcon BA BF FG | eBay This may work at least they wont knock!!

  13. #13
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

  14. #14
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default

    I got these as they are very simular length to the OEM ones 2 Front Sway BAR Link PIN KIT Mitsubishi Outlander ZE ZF Stabiliser 2003 2006 | eBay

  15. #15
    Join Date
    Dec 2010
    Location
    Sunshine Coast, QLD
    Posts
    458

    Default

    i think that is the way to go. i'm sure i suggested it a while back about making the top part of the link solid like and old 323. those links will do it. the delica ones look to be better being longer. just make sure that the lower bolt is 12mm dia.

    edit// just scrolled lower and the delcia ones are 12mm. the outlander ones are only 10mm.
    Last edited by projectrracing; 20-10-2013 at 04:12 PM.

  16. #16
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default

    got my endlinks. got the ones with 12mm bolts too match up with mps sway bar .. Lets see these things knock!!

  17. #17

    Default

    I'm awaiting your success before I replace my knocking ones... :/
    Is there meant to be some kind of restraint to stop the bar moving side to side that you know of? mine does...

  18. #18
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default

    Quote Originally Posted by GibbA View Post
    I'm awaiting your success before I replace my knocking ones... :/
    Is there meant to be some kind of restraint to stop the bar moving side to side that you know of? mine does...
    should have 2 claps on the inside of the rear sway bar bushes.
    Many want Power not many hold it long.........

  19. #19
    Join Date
    Dec 2010
    Location
    Sunshine Coast, QLD
    Posts
    458

    Default

    Quote Originally Posted by RedDjinn View Post
    got my endlinks. got the ones with 12mm bolts too match up with mps sway bar .. Lets see these things knock!!
    pics or it didn't happen.

  20. #20
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default

    Quote Originally Posted by projectrracing View Post
    pics or it didn't happen.
    Knock now bitches
    Many want Power not many hold it long.........

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •