Hi a tune is advisable but not an absolute requirement. If you do not change the MAF housing, OR the MAF housing remains the same diameter (and thus doesn't change the MAF readings), then the OEM tune will probably handle it. There's a variety of tuning solutions, the access port is not the only option.
Both of the vehicles in my signature run safely on the OEM tune. Both retain the OEM MAF housing.
I'd suggest getting the vehicle checked out by someone familiar with the MPS models. The CAI may or may not change the MAF housing diameter,
"Blue Meanie" 2007 Aurora Blue MPS 3 - 18x8.5+44 SSR GTX01 - 235/40R18 Michelin PS5 - 3.5" ETS TMIC - CPE stg 2 mount - HKS/CPE BPV - 2XS inlet - 2XS short shift - Corksport turbo manifold - HT 98 octane tune - Leather/Aluminium handbrake - Momo shifty knob - 7" touchscreen - JDM Mazda Retractable dashtop screen assembly - Bespoke Raspberry Pi Android based GPS/Carplay and instrumentation - 36AH reserve battery and C-TEK isolator - TEIN Street Advanced coilovers 1" drop - Superpro bushings - 220Kw/410Nm.
"Lipstick" 2013 Velocity Red MPS 3 - 18x7.5+48 Enkei RPF1 -225/40R18 Federal RS-RR - CPE TMIC - COBB inlet - CPE stg 2 mount - COBB Stage 1 98 octane tune - COBB shifty knob - 2XS short shift - 2XS turbo manifold.