Corksport stopped dealing with the Aus distributor due to how bad their customer service and delays were. You can order straight from Corksport.
There is a place in NewZealand...
Type: Posts; User: shaneski
Corksport stopped dealing with the Aus distributor due to how bad their customer service and delays were. You can order straight from Corksport.
There is a place in NewZealand...
A little bit North of Sydney MPS2NV Mitch at https://2nvindustries.com.au/ , specialises in these cars. Also owns a 6 himself. Face book page has heaps of pics of his work...
The design of the steed looks more like an intake manifold. The distance from the end runner to where the turbo bolts on to the closest one is horrid and causes massive issues trying to tune it with...
Sarcastic one had nothing but issues with the Steed dur to how uneven the flow was, it performed better with the OEM. The XS power are hit and miss, alot have bad machined flange faces and don't...
Both Closed and open loop tables are tuned targeting AFR's at various load points. if it's adding a heap of fuel even at closed loop it means something is off to try and match the commanded AFR'S...
Your short term fuel trims look way too high (shouldn't be over 8 a car with no leaks is usually zero at WOT)which means the 02 sensor is reading lean unmetered air so the ecu is adding a bunch of...
I would only go genuine Mazda replacement, Onboost Auto who are a wrecking yard have a few BLs and they can also do delivery. Their website seems to be down but the contact details are here
...
For sure, 1st of January they usually have one, plus their financial year is that time as well so they keep it going for a week. You get around 10 percent off on most bits.
Edge always have sale on for new years which is only a few weeks away. You will save heaps.
MPSGarage are known flogs, now Wolfe Racing seem to be taking their place as competitiors with not delivering parts they said they had in stock when they didn't.
You waited 3 days too late....
You are better off getting the fresh air hose or it will just be sucking in hot air from the engine bay
Seems like a decent tune is too expensive for you, yet you want to spend all the money on parts instead of what really makes the car go..Good luck lol, You don't have to tune the car yourself with...
A lot of tuners don't like tuning with versa due to it's logging is slow compared to AP v3. What i mean by slow is there can be knock etc but may not show in the logs due to the delay.
Do the fuel pump and intake first, otherwise you won't get the best out of the tune.
I've been tuned by freek for the last 5 years with 2 different turbo set ups making big HP, it's also a daily and been faultless. Freek is also an ex Mazda tech and qualified mechanic and can pic...
MPS2NV has installed quite a few if he is around.
In the bin unless the cv boots get done so i can drive the Kent
New Manley design pistons for the spare engine with exhaust cut outs for the option of running after market cams.
18074
The parts i have highlighted in your comment can't be used with out a custom tune, larger than stock intake needs a MAF calibration( the car probably won't even start with 3.5 intake on an OTS tune,...
If it's a different engine i'd start from scratch with the tune. Difference in compression/wear etc can have an effect. One tune may be great on one engine, especially advanced ignition timing, run...
All he engine bits still in the boxes. Still on the skirt wearing built engine from a while back. I need to stop driving like a poof to see if i can blow it lol
There goes the neighbourhood with Mitch a staff member..if he doesn't organise over night cruises etc he should be sacked
You can also go to an online shop such as Edge Autosport https://edgeautosport.com/ and compare part numbers between different models.
Would require a hell of a lot of work, the flanges and the position of them isn't even close to what an MPS needs. They wouldn't close to 400 on a Mazda with out a custom tubular exhaust mani and...
The flange don't fit Mazda, would need to go custom exhaust mani and dump pipe or re flange a cheap 2nd hand DP or ATP sell rear housing with Mazda flanges...