Full Throttle Flash

[luke 3mps]

HI all,
Is there any others than the Chip Toque or MRT that do full trottle flashes?

[2XS]

The CT flash still doesn't open to full throttle. Not in my car anyway. It previously opened to 70% and then gradually closed higher in the rev range, now, post flash, it opens to 80% and stays open.

[240MPS]

The CT flash still doesn't open to full throttle. Not in my car anyway. It previously opened to 70% and then gradually closed higher in the rev range, now, post flash, it opens to 80% and stays open.

Hey Troy the boys were telling me there's a ECU in production to replace the Mazda ECU which will give 100% throttle and we were talking about a deal where we can trade our old ECU's for the new one. Maybe something to ask on Dyno day on the 29th of May... You would understand more.. BTW not from Mazda i think it was Haltech ?????

[luke 3mps]

THATS great. cant wait to get that im my car .. thats one thing that annoys me big time!! what the point of having it rev to 6500 redline cut out at 6800 if its HOPLESS after 5000 rpm..... stop it at 5500!!!!

---------- Post added at 10:06 PM ---------- Previous post was at 10:01 PM ----------

240mps can you plz keep me posted to the updates of the ecu .. or if theres a link to watch the progess

[Penguin740]

+1 on any info on ecu progress to get 100% throttle. I'm 80% done with saving the cash to get the ecu done.

[Nuliaj]

The CT flash still doesn't open to full throttle. Not in my car anyway. It previously opened to 70% and then gradually closed higher in the rev range, now, post flash, it opens to 80% and stays open.

I thought 100% open is around 80-85%. I read once the way it calculates the % is based on the difference of ampage being used to power the throttle at idle and and at full throttle. So if it's using 1amp at idle, and 5amp at full throttle, there's your 4 out of 5 amps being used. It then calculates 4 out of 5 as a percentage so 80%. It doesn't actually mean you have 80% opening of throttle. That would mean a reading of 70% is closer to 85% actually open.

I could be totally wrong though...

[2XS]

That is an interesting thought.

I'll look into that one.

[240MPS]

THATS great. cant wait to get that im my car .. thats one thing that annoys me big time!! what the point of having it rev to 6500 redline cut out at 6800 if its HOPLESS after 5000 rpm..... stop it at 5500!!!!

---------- Post added at 10:06 PM ---------- Previous post was at 10:01 PM ----------

240mps can you plz keep me posted to the updates of the ecu .. or if theres a link to watch the progess

I have questions for the boys on dyno day so the others may understand better no link sorry

[rob82]

The CT flash still doesn't open to full throttle. Not in my car anyway. It previously opened to 70% and then gradually closed higher in the rev range, now, post flash, it opens to 80% and stays open.

80% is fully open if your using the dashawk to scan the throttle PID. Depedning upon the vehicle manufacturer some read 100% open as 88% throttle opening as in almost 90degrees.

[luke 3mps]

If this is correct chip torque is on my list again