Hypertech Max Energy Sport - Before and After Stats Using Scantool

[naasif]

Ok,

So my hypertech tune is installed. I've taken some stats using ScanXL both before and after run, just around the block where I live.

Each run was only for about 1 minute, just a quick run through the gears, throttle about 3/4, till the boost gage hit the top (in the Gen 2 it's in the middle of the dash as you know).

So I'm not exactly sure what I'm looking at. I've got MIN, MAX, AVG figures for a crap load of settings. I've got tables of data for various figures at different rev ranges. I've turned logging on, for all the PIDS that the software said the MPS supports, so anything that's not displayed here can easily be sucked out of the logs.

As per SarcasticOne, he wanted to see boot, AFR, fuel Pressure. I don't know where knock retard is on the software and there is no PID for it. I'll have to research how to calculate this using existing PID values.

Here are some tables and some other graphs - can someone please interpret these ?

Let me know what you want to terms of data.

These are the before logs - (ill post the after logs shortly)

table1.jpgboostmap1.jpgengineloadmap1.jpggraphs1.jpg

[naasif]

And here is the after

table2.jpgboostmap2.jpgengineloadmap2.jpggraphs2.jpg