
Hi Dan i knew you would read this post
The finish you achieved on those 2 RX8s was absolutly amazing you have inspired me to get my true red half as good
just wanted to know what was your opinion of the OP spray compound as i have just bought some from zas
Also purchased a Concours 900 da polisher kit with menzerna sample kit and also 4 lc foam pads have you heard about anyone else with this brand of polisher
Sorry to pick your brain would you ever use OP spray wax or would you recommend traditional style wax
If i can t get it right this time im coming to see you
ps dont know how to private message
thanks for any input regards michael

Hi Michael,
Firstly, thanks for your kind words re the two black RX8s. They both took a lot of time to get to that point and I'm glad both owners were happy with the results
Re Optimum Hyper Spray Compound, it's one of the products I use and have been very impressed with it. Works well with both DA and Rotary polishers. Suitable for heavy compounding all the way to light finishing. Very versatile, works clean, and adjusts itself depending on what strength pad you use.
Also, you're dealing with Joel at ZAS, who's just about one of the best online retailers I've ever had the pleasure of dealing with (shout out to Joel)
The Concours 900 polisher seems to be a fairly popular unit. Have not used one myself, but seems to be quite effective, especially for people starting out with paint correction.
It won't have the same 'oomph' as a good rotary polisher or higher spec DA polishers like the Flex VRG, but it should be relatively easy to use and you should still see some reasonable results if you're patient and careful.
LC pads are good. Highly recommend them. Not sure how many pads you have, but for any sort of decent correction work, I'd have a min of around 6 pads (1 x LC Hydrotech Cyan Heavy cut, 3 x LC Orange CCS Medium pads, 2 x LC Hydrotech Finishing pads)...... buy from Joel @ ZAS, he'll give you a better deal than the Vic supplier you'd have bought the Concours polisher from
I've not used the Optimum Spray Wax before, It's on my long list of products to try, just havent gotten there yet. Being an Optimum product though, it will be of a high quality (I rate Optimum products very highly and use A LOT of them lol).
My current wax of choice is Prima Banana Gloss. Goes down easy and comes off just as easy. Brilliant results too.
Let me know how you go. There are lots of YouTube vids out there on how to effectively use DA polishers. Just remember to work small areas at a time and be patient
Good luck. Let me know how you fare
Dan
Sent from my iPhone using TapaTalk
Last edited by Caffeine Fiend; 28-10-2011 at 03:33 PM.
| 2XS SRI | H&R Lowered Springs | cpe 75 Duro Engine Mount | Whiteline Rear Swaybar | Moog "Problem Solver" Rear Endlinks | 3M Carbon Black Tint | Lakin Custom Plates | Prima Paint Protection | Paint Correction by Me![]()

Thanks for the feedback Dan really appreciate it
Will definately let you know how i go
could you possibly tell me how to do a pm just in case i need to make a booking with you if everthing goes pear shaped

Last edited by Caffeine Fiend; 28-10-2011 at 10:11 PM.
| 2XS SRI | H&R Lowered Springs | cpe 75 Duro Engine Mount | Whiteline Rear Swaybar | Moog "Problem Solver" Rear Endlinks | 3M Carbon Black Tint | Lakin Custom Plates | Prima Paint Protection | Paint Correction by Me![]()


Last edited by Caffeine Fiend; 30-10-2011 at 02:24 PM.
| 2XS SRI | H&R Lowered Springs | cpe 75 Duro Engine Mount | Whiteline Rear Swaybar | Moog "Problem Solver" Rear Endlinks | 3M Carbon Black Tint | Lakin Custom Plates | Prima Paint Protection | Paint Correction by Me![]()